
Why It Matters
With our kit, you can:
✅ Stop rust in its tracks
✅ Seal and protect in just a few hours
✅ Extend your van’s life — and adventures
Stay Rust-Free, Worry-Free

Built for the Way You Travel
No ramps, no workshops — apply it on your driveway with step-by-step instructions.
🌦️ All-Season Protection
Designed to stand up to UK winters, coastal air, and muddy festival fields.
🚐 Tailored for Campers & Motorhomes
Whether it’s a Transit, Boxer, or Ducato, our kit is vanlife-tested and trusted.

All-Weather, Year-Round Protection
Whether you are parked up by the coast, driving through Scottish winters, or crossing the Alps, Lanoguard shields your underbody from corrosion caused by water, salt, and road grime. Peace of mind for every season.

Easy DIY Application – No Specialist Needed
It’s simple to apply. Spray, cure, and go. You can top up annually as part of your regular motorhome or campervan care routine.

Clean and Tidy

Extends the Life and Value of Your Camper Van
Your camper isn’t just a vehicle — it’s your freedom machine. Lanoguard helps keep it structurally sound, rust-free, and attractive for years to come — a must for future resale or part exchange value.

Before

After

Before

After

Before

After
Loved by thousands of vehicle enthusiasts, just like you.
Accessories
View allFrequently Asked Questions
Moto Range is designed for all vehicles, bikes, trailers and machinery to name a few. It protects the whole vehicle underbody and chassis from rust, corrosion and electrolysis with a strong barrier coat. Find out more and see our Moto Range.
Marine Range is designed for boats and any machinery submerged in sea water. It protects from rust, corrosion and electrolysis the same as our Moto Range, but also contains marine growth inhibitors to stop barnacle build up on any equipment submerged in seawater. It is safe, non-toxic and marine ecology friendly. Some of its uses include on outboard and inboard motors including electrics, propellers and prop shafts and boat trailers. Find out more.
Outdoor Range is a thinner formula, designed for metal, rubber, vinyl, wood, and almost all materials. It can be used on BBQs, sheds, fences and decking to name a few. It provides protection from corrosion, rust and waterproofs as wells preventing mould build-up in woods and vinyls due to it containing anti-fungal. Find out more.
Lanoguard has been designed for yearly/seasonal applications. It should be topped up at least once a year to ensure continuous protection. Although due to the simple application process there’s no harm in doing an Autumn & Spring application! The product is broken down by UV, so the more it is exposed to sunlight the shorter its life span. Inside box sections or inner chassis for example, it will last longer.
The general rule of thumb is that a little Lanoguard goes a long way, 1.8L of moto spray per application. – is ample coverage for vehicles such as Land Rovers and Pick Up trucks any vehicles over this size we would recommend more than 2L.Click hereto look at our range.
Preparation is very minimal - all you need to do is jet wash your vehicle removing any dirt and grime. Make sure you remove any flaking or loose bits of rust, paint or underseal. Sometimes a wire brush can be used if needed to remove flaking bits. Ensure the vehicle is dry before you apply Lanoguard – it doesn’t have to be bone dry, as Lanoguard will displace moisture to an extent, but ensure you do not apply to a dripping wet surface. See ourhow to apply page here.
Lanoguard is great for chassis with surface rust. It has a natural affinity to ferrous metals and will bond to the metal underneath any surface rust, it acts as a barrier by hermetically sealing to the surface keeping oxygen and water out - stopping any rust from developing further.
Lanoguard reaches its final state around 7 to 10 days after application. Day 0 it is “oily” day 3 “soft” and final state is dry to the touch, but you know something is there. Like a candle to feel. Maybe a little softer. It dries to a clear / transparent semi satin wet look and stays that way for some months eventually dulling a little. But always stays clear; and of course, you can jet wash it to clean it back to how it was when you put it on. It is best to not drive the vehicle for 24hours to let it get through the first part of the curing process.
Lanoguard is eco-friendly and has green non-hazardous certifications. It does not require special handling, protective clothing or disposable gloves, which all add to the carbon footprint of utilising a product that is hazardous. The primary ingredient of Lanoguard is Lanolin which is a very ecologically safe and sound base. In fact, an entire dam in New Zealand was moved down river on a base of Lanoguard marine grease which shows you how the river authority was not concerned about any toxins that would be left as a result.