2 Litre Pressure Sprayer Kit with 360 Injector wand - Lanoguard
2 Litre Pressure Sprayer Kit with 360 Injector wand - Lanoguard
2 Litre Pressure Sprayer Kit with 360 Injector wand - Lanoguard
2 Litre Pressure Sprayer Kit with 360 Injector wand - Lanoguard
2 Litre Pressure Sprayer Kit with 360 Injector wand - Lanoguard
2 Litre Pressure Sprayer Kit with 360 Injector wand - Lanoguard
2 Litre Pressure Sprayer Kit with 360 Injector wand - Lanoguard

2 Litre Pressure Sprayer Kit with 360 Injector wand

FG icon
£45.99
£45.99
Tax included. Shipping calculated at checkout.

Lanoguard's 2 litre pressure sprayer and injector wand kit makes applying to the larger areas of vehicles with an even coverage much easier, and can be reused again and again, becoming part of your regular Lanoguard maintenance and protection kit.  

We have spent much time and development trialling to ensure this pressure sprayer system and accessories works well with Lanoguard spray products to maximise ease of use, whilst minimising waste of products. 

Some of the main features of note are:

  • High pressure spraying, up to 3 Bar
  • Has 1 metre long injector wand with near 360 misting nozzle for applying to internal areas of box section, sills etc. (see video of the wand being used below)
  • Includes a atomising cone nozzle for adjustable mist to jet to access all the harder to reach areas
  • Includes a flat spray pattern nozzle for fast even coverage and least waste coating only once to all areas it sprays

Here is a video showing the 2 litre pressure sprayer kit in use along side a trigger spray used for coating a boat trailer:


Here is a video the injector wand being used with the 2 litre pressure sprayer kit:

We have developed, tried and tested this sprayer over many months and worked hard to ensure we can develop it to be the ideal sprayer for keen DIY'ers with multi vehicles / machines or for our trade partners doing regular applications.

We recommend using this sprayer as a large area covering tool, covering quickly and with ease.  However, if youa re treating larger vehicles and machines we would recommend using ourr 10 litre stainless steel pressure sprayer kit

This sprayer is well accompanied with our Pro sprayer 1 litre bottles or the kit extenion trigger sprayer to cover the finer details and nooks and crannies.  

It is often bought alongside the smaller sprayers and the 2, 5 or 20 litre jerry cans of Moto or Marine spray.  

It is also an ideal accessory to the Lanoguard Underbody and Chassis care Ultimate kit if you wish to inject alot or have lots of large area to cover.

Please note. This is the sprayer only and does not come with any Lanoguard spray products

Back to Lanoguard Sprayers & Accessories

Customer Reviews

Based on 3 reviews
33%
(1)
33%
(1)
33%
(1)
0%
(0)
0%
(0)
A
Albert Scollay
Pressure sprayer

just done the job,the sprayer worked Good but goes through a lot a fluid fast , will have to get the small spayed before next time,if it hold up as expected ,Shetland winter will be a Good test.

R
Richard Richard
2ltr pressure sprayer - Mixed experience

Great for cavities such as sills / chassis rails, inside suspension components, wheel arches.
Not good for car underside where you have to tilt the bottle to direct the spray. This is less of an issue if you have the luxury of an automotive lift / ramp but its a real pain when under the car on axle stands. They need a two 90 degree extensions to address this. One short one, plus a 12 inch one to enable reach into areas such as located around wheel well tops, suspension tops etc.
I would also note that the discharge rate is high meaning it drinks Lanoguard faster than the average V8 at Santa Pod.
To conclude I'd say great for cavity work, but you'd be better using a cheap 5Ltr screwfix pressure sprayer (includes extension) for the higher underbody areas.
The 2ltr Lanoguard product is well constructed, but expensive and a couple of extra attachments would address its shortcomings. Please note that the current 45 degree attachment they offer, is NOT compatible with this sprayer. I tried it.

R
Richard M
Pressure sprayer

I purchased the pressure bottle and injection wand to spray inside my Van's sills. It did this job great, but watch out the sprayer used a huge amount of lanoguard very quickly, luckily I bought 5 litres but you could soon spray a litre without realising very quickly which is very expensive, so in my opinion it's not a very economical way to apply lanoguard.