How Lanoguard Electric Spray could help you this winter!

Nov 3, 2025

🚗 For Car Owners

1. Damp Engine Bays Causing Starting or Running Issues

Problem:
Moisture and condensation under the bonnet — especially during autumn and winter — can cause misfires, poor starting, or engine hesitation. This often happens when water enters connectors, plug leads, or sensor housings.

Lanoguard Solution:
Moto Electrics Spray displaces moisture and coats those vulnerable electrical connectors, plugs, and terminals, keeping them dry and reliable even in damp or frosty conditions.

2. Corrosion on Battery Terminals and Earth Connections

Problem:
Battery terminals corrode due to exposure to salt air or condensation. This causes voltage drop, poor cranking, or intermittent electrical faults.

Lanoguard Solution:
A quick spray on terminals and earth points prevents oxidation and maintains a clean, conductive connection without grease build-up.

3. Faulty Sensors and Electrical Connectors

Problem:
Modern cars rely on countless exposed connectors — ABS, MAF, lambda, ECU plugs — that can corrode or short out due to road salt, puddle splashes, or ageing seals.

Lanoguard Solution:
Forms a non-conductive, corrosion-resistant layer around those connectors, sealing them from moisture ingress and prolonging sensor life.

4. Fog and Headlight Moisture Ingress

Problem:
Condensation builds up behind fog or headlight lenses due to leaky seals or damp wiring connections. Over time, this leads to blown bulbs or corroded contacts.

Lanoguard Solution:
Spraying around the electrical connectors and housings at the rear (not the lens!) helps prevent moisture creeping into the lights, keeping connections clean and working.

5. Salt and Winter Road Grime Causing Electrical Gremlins

Problem:
Drivers on gritted winter roads often find warning lights appearing or intermittent faults due to saltwater getting into undercarriage wiring or connectors.

Lanoguard Solution:
Provides a salt-resistant, jet-wash-proof barrier over connectors — ideal for preventing corrosion-related electrical issues through the whole winter season.

🏍️ For Motorbike Owners

1. Corroded Connectors and Terminals

Problem:
Exposed wiring under the seat, behind fairings, or around headlights and rear lights often corrodes when riding in wet weather or washing the bike.

Lanoguard Solution:
Moto Electrics Spray protects connectors, plug caps, and terminals by repelling water and stopping corrosion before it starts.

2. Intermittent Electrical Faults After Jet Washing or Riding in Rain

Problem:
After washing the bike, indicators, brake lights, or the ignition can behave erratically because water seeps into connectors.

Lanoguard Solution:
Displaces any trapped water and leaves a protective film, so you can confidently clean your bike without risking electrical issues.

3. Battery or Charging Problems After Winter Storage

Problem:
Bikes left unused in damp garages often develop poor starting due to corrosion on terminals and electrical contacts.

Lanoguard Solution:
Spraying connectors and terminals before storage prevents oxidation and keeps electrics ready to go when spring returns.

4. Moisture in Plug Caps and Ignition Leads

Problem:
Damp spark plug caps cause misfires or stalling, especially in wet weather or coastal environments.

Lanoguard Solution:
A light coat around plug caps and ignition coil connectors seals them against moisture and prevents arcing.

5. Sensor & Lighting Failures

Problem:
Moisture ingress into brake-light switches, sensors, or rear light connectors can cause sudden faults or warning lights.

Lanoguard Solution:
Protects those exposed electrical joints and housings, reducing the risk of corrosion and costly replacement parts.

🌧️ The Common Thread: Moisture, Salt, and Time

Both car and motorbike owners suffer from invisible corrosion that builds up over time — leading to frustrating intermittent faults and costly repairs.

Lanoguard Moto Electrics Spray is the simple, preventative solution: