Not cared for
Cared for with Lanoguard
- • Any Vehicle, any time of year • Minimal prep, drives out moisture, multi-surface • Easy to apply, hermetically seals
If you love your vehicle,
Simple, easy, DIY care for your leisure vehicle underbody that you can apply all year round, even in cold, damp conditions. Protecting the underbody of your LV is often neglected, expected to be messy, needing tools you don’t have, and a smelly, difficult and time-consuming job. With our kits, this all changes and is made easy for you. Lanoguard LV underbody protection is long-lasting and can be applied in around 20 minutes and will defend the motorhome, caravan, or camper you love from corrosion so you can enjoy using it without worry.
Our Leisure Vehicle Underbody Care Kit gives you everything you need to protect your motorhome, caravan or campervan underbody, chassis, and accessories from the elements, giving you the best value for money. Our LV range is ideal for full protection on any surface including metals, rubbers and plastics – LV Moto Spray hermetically seals the surface to protect against rust and corrosion, nourishes and lubricates, waterproofs rubbers and plastics to prevent moisture build-up and mould growth.
Application is made quick and easy with the trigger spray set, which atomises the product and provides a consistent, even coverage. The kit also contains our 1L Professional Sprayer Bottle for easy ‘grab and go’ spraying and our 360o Misting Injector Wand for application inside box sections, sills, and inner chassis. For full and thorough coverage to protect your LV from all rust and corrosion.
LV Moto spray is designed for the easy and ultimate protection of all chassis’ with metal, plastic, rubber:
- Camper Vans
The product can also be used to protect ANY vehicles or machinery, including:
- 4x4 and Off Road Vehicles – Land Rover, Jeep, Toyota Land Cruiser
- Classic cars - Triumph Spitfire, TR4, TR6, Rolls Royce 20/25, Jaguar E-Type
- Quad Bikes and Trikes
- Lorries and Trucks
- Fire Engines
Better than products you have tried before, Lanoguard Moto Grease can be used wherever petroleum grease is used but will provide you with many benefits over the product you use currently and can be used to do more jobs than a normal grease too.
Something which really makes our products stand alone when compared to others is that they will stay in place doing their job for a long time and won’t be displaced by pressure washing nor will they evaporate up to 450°C or be dissolved by petrol products. As well as this they are ecologically friendly and last much, much longer. They won’t perish any rubbers or plastics and in fact will nourish them, meaning you don’t need to mask the rubber!
Lanoguard’s LV range has been specifically developed to prevent the problems that all leisure vehicle enthusiasts encounter. Long lasting, waterproofing, anti-corrosive sprays, greases and lubricants for use on all on all types of vehicles prone to rust, corrosion and in need of protection.
- Seized Nuts and Bolts
- Chassis and Suspension
- Vehicle Electrics
- For Classic Bike Preservation too - Whole Frame, Headstock Bearings, Rose Couplings, Ball Joints and Flexible Joints
- Trailer Bodies and Chassis’
Premium quality British made products which are jet wash, heat, saltwater and petrol resistant. They protect against electrolysis, corrosion and seizing. They stay in place and won’t evaporate or dry out – meaning you can be rest assured that your vehicles will remain protected long-term! Our formula is also non-petroleum based making it eco-friendly, non-toxic and safe to apply without the need for heavy PPE.
“Application and coverage were outstanding. Really easy to apply to the underside of my motorhome.” – Tony P, Lanoguard User
"Highly recommended. Very easy and clean to use product which is ideal for DIY rust treatment and prevention. Great support and fast turn around of orders." - Lanoguard Customer Quote
“So pleased with the outcome, easy to use even for someone like me who isn’t mechanically minded.” – Tony E, Lanoguard User
"Having used the more traditional wax/oil based treatments many times (and always dreading the annual getting covered in the stuff and coughing & spluttering on the fumes) I found Lanoguard a whole lot more pleasant to work with, best bit was not getting covered in sticky nasty petrochemicals"
One simple kit
One simple kit
One simple kit
Underbody protection made easy by lanoguard:
Just pure and simple protection from the elements, from road salt
Stop all rust and corrosion
No Mess. Less clean up and non-toxic
Protection for the year - You can drive your vehicle without worry of rust forming
Spray on any metals, rubbers and plastics.
Can be sprayed directly on surface rust
Very low prep. No masking up required
No concern about disrupting any current existing coatings
Applied to my marine bronze propeller and P-bracket and stainless steel prop shaft after preparing surfaces with 600 wet & dry paper. As it was a warm day in May, there was no need to pre warm the product as it went on very smoothly and easily with a cloth. I will examine the prop etc at the end of the season in October and compare the level of fouling with how I have prepared it in the past with just 600 wet & dry followed by a metal polish.
Easier than most and goes a fair way. Will know better it it has kept winter at bay
finally took the plunge and purchased this product after reading the many good reviews,
very happy with it, power washed the wheel arches and as much of underside of vehicles Isuzu d max , and Honda crv,
left to fry for a bit then sprayed on the lanoguard, it was as easy as described , the sprayer worked faultlessly, and it gave good even coverage with minimal waste, or mess, and little effort, on;y advice if possible get a pit or ramp to make the job so much easier,
i ordered the 2 ltr container, and did the d max and a good bit of the crv and still have some left. will certainly buy more and use again
Used on a land rover. Applies easily and looks great
After using Dinitrol for years and the associated task of masking up cleaning shutz gun out i though i would try Lanoguard. I have to say i am impressed, easy to apply, no mess and a little goes a long way. The accessories make the job so much easier, i must admit i haven't used the grease yet but will when time allows.
When it arrived I thought that's never going to do the whole underneath of the motorhome but it as with a little left for you for touch ups, next project buy the inner silk and channeling kit. Well pleased
Absolutely fabulous item, had undercarriage, subframe & engine compartment protected with LANOGUARD, great kit very easy to use, will thoroughly recommend
I spent a lot of money on having a professional under body treatment done on my 2007 Freelander 2 just to find the job done was not up to all the guarantees that they promised, with Lanoguard I now know I have covered all the important areas easy to use minimal effort I can really recommend this product I wish I new about this product before spending a lot of money.
I have previously used the Wax-based product and although an effective rust treatment the one finds application is tricky with blocked nozzles, having to cover rubber etc. Plus smoke and flames should you come back to do welding in later years!
Lanogaurd has none of these issues and could not have been easier to apply to my ageing but much loved X Type Jaguar. It has even stopped my "Winter-Suspension Creak." (Jag owners will know!)
So far I have only done the middle and rear end but very happy to see only a third of the bottle used so more than enough to tackle the few rust prone area at the front and probably enough to do the whole of my Ford Streeka.
So it is actually good value for money also.
Great service great product very easy to apply.
Just finished protecting the underneath of my car, very easy to use, covers very quick. I pressure washed on Wednesday and completed it today.
Very pleased with product, easy to use.
I bought the smaller bottle kit for my passat and my mums wee aygo.. plenty to do both and I ended up using a lot of the the grease on my passat to try and save it from rust 😂…. Watch you don’t get it on alloys as its cling is incredible and I struggled to remove lanoguard from the alloys with a jet wash after it got on them from my hands, it will definetly stay on the bottom of the car
,Very easy product to use, jet washed underbody first & allowed to dry off, then brushed any loose dirt off before blowing down with compressed air, probably overkill, so prep time was probably a couple of hours
i stood the 2ltr can in some warm water to make it flow better through the chassis injection tube, i was surprised how far this product goes, really covers well, the application to the chassis & underbody took around an hour & used 2ltrs of Lanoguard,
Excellent product & so easy to use
Kit looks awesome, not had time to use it yet, Will send review when tried it. Sure it Will do the job 👍
Vehicle already affected by rust? All is not lost.
Why choose lanoguard?
Followed Lanoguard instructions and the preparation and application process was simple. Can't comment on the quality of the product as it's just recently been applied to the underbody of my motorhome.
But can confirm that it is very easy to use.
Waited for the weather to warm up a bit before applying the Lanoguard LV kit to my motorhome. My motorhome is a large 6 berth version and I had read and researched this product fairly extensively before buying. My main concern was how it compared to the likes of hammerite and other well known makes. I do not have a ramp or any form of lift that I could use to raise my RV to apply it, so all the work had to be done by using the vehicles own jack, raising it up a little and then sliding on my back underneath to apply it. Sounds dangerous but really it wasn't as the natural height on my RV is enough to slide under without a jack. Anyway I found that by using a bucket half filled with warm water helped apply the product without any issues at all. It was easy and a little really does go a long way. Given the length and overall size of my RV I thought that I would struggle to get it all covered but it did it really easily, enough for some later applications if needed. I can not comment on how well it protects as it is far too early to tell. So for those thinking 'can I do it myself on my limited driveway' then the answer is a resounding yes. I do have video of it being applied if anyone is interested.